ECOMULTICAT 2105
| DESIGN NAME: | ECOMULTICAT 2105 |
| SERVICE: | MULTIPURPOSE VESSEL |
| CLASSIFICATION: | Tug – Recovery Oil |
| NAVIGATION: | Coast Area |
| CREW: | 4 |
| LENGTH O.A.: | 21.05 m |
| BEAM O.A.: | 08.00 m |
| DRAFT: | 01.60 m |
| DEPTH: | 02.70 m |
| DISPLACEMENT: | abt. 205 t |
| MATERIAL: | Steel A |
| MAX SPEED: | 9 kn |
| PROPULSION: | Tunnel Fix Propeller |
| BOLLARD PULL: | 8 t |
| DIESEL OIL: | 40 m3 |
| FRESH WATER: | 10,5 m3 |
| BALLAST: | 50 m3 |
| SLUDGE: | 1.5 m3 |
| BILGE: | 2.0 m3 |
| CLEAN LUBE OIL: | 1.5 m3 |
| DIRTY LUBE OIL: | 1.5 m3 |
| RECOVERY OIL: | 35 m3 |
| MAIN ENGINES: | 2×295 kW – 800 Hp -1800 rpm |
| GEARBOX: | 2x Reintjes WAF 264 ratio 5:1 |
| PROPULSION: | FP Nozzle – Diam. 1250 mm |
| AUX. ENGINES: | 1x GENSET 75 kWe – 94 kVA 50 Hz -1500 rpm 1x Mase 9 kW – 50 Hz – 1500 rpm |
| BOLLARD | 7 (4 double, 4 single, 1 reinforced stern) |
| HOOK | 1 x Hook 10 t – Bollard Pull |
| CRANE | Heila HLM 25-4S – 2 ton. a 10,7 m |
| ANCHORS | 1xSHHP 115 Kg |
| ANCHOR WINCH | Electric/Hydraulic with Barbotin P=5,5 kW |
| CAPSTANS | n. 2 bell – 3 t |
| RADAR: | Furuno Far 3000 with chirp Antenna |
| AUTOMATIC PILOT: | Furuno Navpilot 711c |
| COMPASS: | Magnetic type |
| EPIRB: | Sailor 466 mhz |
| AIS: | Transponder FA-150 |
| GPS: | Chart Plotter |
| EPIRB: | Jotron Tron 40s |
| NAVIGATION LIGHTS: | Iacs Approved |
On board took place 4 bed for the crew in three cabins, one double for seamans, one cabin for the chief engineer and another one for the captain. Furthermore in the accommodation space there are a mess, kitchen and toilets
Lately, the need for solving the problem of sea pollution is becoming more and more imperative. Different kinds of waste such as oil, gasoline and microplastic are a serious threat for the marine ecosystem. For this reason, we felt obliged to develop a multipurpose boat focused on giving a solution to this problem. The boat we have designed is capable of carrying out every work related to the antipollution. Its large oil recovery tank allows for recovery and storage of oil and dirty waters. Recovery and discharging of oil can be achieved using an appropriate pumping system. The deck is equipped with a crane that allows lifting of auxiliary machinery and the hoses for aspiration and can also accommodate a winch for placing anti-pollution floating barriers.
Ecomulticat is designed to operate in coastal areas, near terminals and harbours. The minimum crew requirement is two workers, but it can host maximum 5 workers in three bed rooms. The first floor of the superstructure has one bathroom, a kitchen, a messroom and a warehouse. The second floor accommodates the wheelhouse which is specifically designed to allow for wide view of the whole vessel. The main services it can provide are:
- Liquid waste management
- Fire surveillance
- Rental of floating anti-pollution barriers
- Emptying and cleaning of oil
- Drainage of cesspools
