MULTICAT 2105
0
m
Length
0
m
Breadth
0
kW
Total Power
0
t
Bollard Pull
0
m3
Recovery Oil Tank
GENERAL
| DESIGN NAME: | ECOMULTICAT 2105 |
| SERVICE: | MULTIPURPOSE VESSEL |
| CLASSIFICATION: | Tug – Recovery Oil |
| NAVIGATION: | Coast Area |
| CREW: | 4 |
MAIN FEATURES
| LENGTH O.A.: | 21.05 m |
| BEAM O.A.: | 08.00 m |
| DRAFT: | 01.60 m |
| DEPTH: | 02.70 m |
| DISPLACEMENT: | abt. 205 t |
| MATERIAL: | Steel A |
| MAX SPEED: | 9 kn |
| PROPULSION: | Tunnel Fix Propeller |
| BOLLARD PULL: | 8 t |
TANKS CALIBRATION
| DIESEL OIL: | 40 m3 |
| FRESH WATER: | 10,5 m3 |
| BALLAST: | 50 m3 |
| SLUDGE: | 1.5 m3 |
| BILGE: | 2.0 m3 |
| CLEAN LUBE OIL: | 1.5 m3 |
| DIRTY LUBE OIL: | 1.5 m3 |
| RECOVERY OIL: | 35 m3 |
PROPULSIVE & AUX SYSTEMS
| MAIN ENGINES: | 2×295 kW – 800 Hp -1800 rpm |
| GEARBOX: | 2x Reintjes WAF 264 ratio 5:1 |
| PROPULSION: | FP Nozzle – Diam. 1250 mm |
| AUX. ENGINES: | 1x GENSET 75 kWe – 94 kVA 50 Hz -1500 rpm 1x Mase 9 kW – 50 Hz – 1500 rpm |
DECK EQUIPMENT
| BOLLARD | 7 (4 double, 4 single, 1 reinforced stern) |
| HOOK | 1 x Hook 10 t – Bollard Pull |
| CRANE | Heila HLM 25-4S – 2 ton. a 10,7 m |
| ANCHORS | 1xSHHP 115 Kg |
| ANCHOR WINCH | Electric/Hydraulic with Barbotin P=5,5 kW |
| CAPSTANS | n. 2 bell – 3 t |
NAV SYSTEMS
| RADAR: | Furuno Far 3000 with chirp Antenna |
| AUTOMATIC PILOT: | Furuno Navpilot 711c |
| COMPASS: | Magnetic type |
| EPIRB: | Sailor 466 mhz |
| AIS: | Transponder FA-150 |
| GPS: | Chart Plotter |
| EPIRB: | Jotron Tron 40s |
| NAVIGATION LIGHTS: | Iacs Approved |
ACCOMODATION
On board took place 4 bed for the crew in three cabins, one double for seamans, one cabin for the chief engineer and another one for the captain. Furthermore in the accommodation space there are a mess, kitchen and toilets
0%
